In order to recommend compatible parts I need a little more information. Is the Currie motor a 24 Volt 500 Watt motor that you plan to overvolt and run at 36 Volts?
Sorry. I'll be using a 24V / 450W Currie motor. Below will be my setup;
Motor: Currie XYD-6B2 (24V / 450W)
Battery w/ 36V charger: 3x-10ah OR 15ah - I'd like to fit all 3 in the stock battery location and get 40-45mins of run time. If both will fit approximately how much more run time will the 15ah get vs. the 10ah?
- The 10ah is 5-7/8" long x 2-1/2" wide x 4-5/16" high
- The 15ah is 6" long x 3-7/8" wide x 3-3/4" high
What amp per hour charger do you suggest?
Our CHR-36V1.6A 36 Volt 1.6 Amp charger will work great with either the 10Ah or 15Ah battery pack. For a faster charge our CHR-36V2.5A or CHR-36V3A charger could also be used.
I just bought a new Razor dune buggy and I want to upgrade it to 36V for a upcoming Christmas present. So far all I've bought is a Currie 500w motor.
I need a controller, throttle with on/off switch built in & reverse switch. After looking at some parts on this site I need to know what parts work with each other before ordering them.
Part Link: http://www.electricscooterparts.com/speedcontrollers36volt.html
THR-136, 137 or 138
Part Link: http://www.electricscooterparts.com/throttles36volt.html
If I choose one of those throttles above will it work as an on/off switch? In the link below supports says to use a different heavy duty on/off switch but that was a couple of years ago, maybe these throttles with on/off switch built in weren't available then, not sure I'm new to Razors?
See 1/4 down the page;
Wiring Link: http://support.electricscooterparts.com/support/discussions/topics/1000037315/page/1?url_locale=
There are no specs? Will this work at 36V?
Part Link: http://www.electricscooterparts.com/powerswitches.html
Wiring Link: http://support.electricscooterparts.com/support/discussions/topics/1000070478
I think that's it for now. If there are better parts or if I have the wrong parts please let me know. Thanks in advance for any help!!!