Ok I will love it if some of you member got back to me and ket me no what you thourt if my scooter mods.
It's was a standard razor E200 int green lol . That had to go . So you no its 24v 200w motor some say it's 250w .
I upgraded it to a 350w 24v motor . To keep things but to hard . I did get a 800w 36v motor . But after going tought 3/4 contollers as they keepet on going into hard on moss open . Even tho this standards razor 200 controller Iv worked with a few times & never had a problem. But the the razor controller will not take 36 v it just trips out . But if u csn get it running on 24v then switch it to 36v it works .
So I was going to overvolting my 350w 24v to 36v when I need it will be they way . It's like useing a 700w moter whan overvolting . Then when asking u about useing two motor you told me others have used them with grate resuts .
I will put puc up. The 1st will be the scooter standard . Then the 800w I was going to put in. And so on.
It's cone s long way. & I could never of done it with out the help of your team so I can not mo what to say . U realy r the gods when it comes to this.
I put the pic up of the set up , but this pic is a 36v to 48 v when mine is 24v to 36v. Snd I used the SPDT switch . Would be nice to used the 36v charger I got new for it . But I under stand I need to charge 24v by one port . & the 12v by the other port . That's fine .
I fell I love when I see that if I put my 350w to my 250w motor & overvolting it gos to 1100 w wow . Had to be done lol . So hear are some pic of me doing the scooter & doing the box iver to cover the 3D battry or to cover the 800w moter . Or to cover the 2 motor. Was ment for the 800w 36v if I am onist as thst was the 1st thing I was going to do.
But when get the motor & the controllers & the battey . I started to strip it down. & that's when I found out that befor u do any thing like this u make sure u got all the bits . Cheque & cheque & if needed be go over it again trust me . I got all the way then found out the 800w motor had a sprocket that was a T8F chain and needed a back T8F sprocket . Dam.
So I got a 350w 24 motor upgrade to the razer e200 . U have to cut the footstsnd away get rid. & u csn bend the brack lever out a bit . But if going for a 500w under the frame then u need to move the brake bracket out side the frame not hard.
So no best r some pic . Me spraying it.
Making the box . Trying to fit the 800w motor lol . Going to a 350w cool . Then going for the 200 ish motor. It was a 11mph scooter it's now a 18mph to 22 mph. Puting the motor together .
Wiring diagrams . Any help or if u think I need a fues then let me no ,
So I would love comments on what u all thing about this.
Thsnk you Jamie
Hi I also need to no if its posable I need a switch was using a on off on one but 3 ends. I need to run 24 on one switch then trun it up to 36v if poss . No controller. Bypassing it. Please help me I no I got the wrong switch help and my scotter is done. Or if poss can I use my controller to run the 24v set up but with the 350w 24v motor as normal but then when I flick a switch it will make it run on 36v . I was thinking the last battrey says it a + at the end then say that Gos to the + to the motor but with a switch In between so flip it on then it makes it work on 36v but turn it off and it back to 24v but using the 24v controller . There must be a way to run it on 24v set up controller so it's standard but then with a switch make it 36v but for that time it's on 36v the controller is bypassed so it don't fry the moss fets . Pleaee help
P.s I will try and keep all Q now to this one & not use the others . Or is there a way u can deltet the others so it's just this one so I will not make that mistake again . Thank again I sill say your the gods of scooters