This forum is in read-only mode. Please continue to browse, but replies are disabled for now. Why?

Turn Signal & Brake Lamp Wiring

I found this wiring diagram posted from ESP Support. I was just wondering when using this kind of lever will the red lights stay on as running lights and then get brighter as the brake is engaged.

(39 KB)
I was also wondering how to wire the flasher relay into this switch set up.
(26.7 KB)
That wiring diagram is drawn with single filament brake light bulbs which will only work as the brake lights and not for running lights. Running lights could be added using separate bulbs, or dual filament bulbs could be used for both the running lights and brake lights.

To use the SWT-32 with the turn signal wiring diagram its red wire would go to the blinker relay, and its green wire to the right turn signal lamps, and its blue wire to the left turn signal lamps.

Login or Signup to post a comment