This is going to be a week by week messages & a few pic of my razor standard E200 250w motor.
I hated the green 1st off . Lol. So needed to go . Plus it's ok scooter well put together but needed more power. So I put a 800w 36v motor into it.new controller of course, 36v twist grip,new batteyes 3 of them 12v 7ah . Making 36v. But as I was get all this stuff it was looking good got all the bits I needed. I new the motor needed to be mounted on top of the footplate as you will see in the pictures. But there was one thing I over looked & was not till I came to putting it all together so I had started the wiring of the new controller,started to work out wear to put the new motor mounts & so on then I see a big problem. The sprocket on the new 800w motor I had got had a 8mm sprocket & 8mm chain pitch & the razor E200 uses a 6mm pitch. Could not beleve it. So when doing any mod's on your scooter make sure you have got all the parts. Even do a dummy run 1st . I wished I had I was 60% into converting it.
So I will put the pic of how it was standard . Green mmmmm . Lol
Then when I cut the footplate as I thought I was ready to mount the motor . I will put more pic up soon as I mount the motor and then fibreglass the backend to keep it looking nice .
Please help me on this swtch have I got the wrong one I got a on off on SPDT switch like you told me to but some are say as soon as I plug in the charger to charge the two battrys it will go bang . Please help has I want this running ASAP , but had no reply yet from you