How do i replace my throttle on my eZip e450 electric scooter
about 6 years ago
Here are the procedures to follow to replace a throttle on an eZip E450 electric scooter:
1- Verify that the power switch is in the off position 2- Remove the footplate. 3- Disconnect the battery pack wiring harness connector from the main wiring harness connector. 4- Unplug the throttle from the controller. 5- Remove the old throttle from the handlebars and throttle cable from the scooter. 6- Install the new throttle on the handlebars and run the throttle cable into the scooter. 7- Plug the new throttle into the controller. 8- Reconnect the battery pack wiring harness connector to the main wiring harness connector. 9- Reinstall the footplate. 10- Turn the power switch on and test run the scooter to verify proper operation of the new throttle.