1-800-908-8082
 
8am-5pm Pacific Time Monday-Friday
This forum is in read-only mode. Please continue to browse, but replies are disabled for now. Why?

Break light stuck on .motor dont work

Any tips will help.tried unplugging switches at handle bars
That could be caused by a short circuit in the brake switch cable. The next step I would take is to disconnect the brake switch cable or cables from the controller and see if that helps.
Unplugged each plug one at a time .break light stayed on .only one plug to voltage regulator turned it off.new bike for me god only knows what they did.
Unplugged all small wires @ controlor .break light stays on .but when push break switch in head light goes out .

Login or Signup to post a comment