 |
|
 |
ElectricScooterParts.com Support Center
How can we help you today?
This forum is in read-only mode. Please continue to browse,
but replies are disabled for now. Why?
Can u use a 36v e.s.c. to test a 48v motor
ESP Support
said
almost 8 years ago
A 48 Volt brushless motor will run slowly on 36 Volts so a 36 Volt controller should be able to be used to test it.
If you tested the power switch, wiring, throttle, battery pack, and brake switch and they are all good then the problem would most likely have to be with the motor or controller.
If you tested the power switch, wiring, throttle, battery pack, and brake switch and they are all good then the problem would most likely have to be with the motor or controller.
H23456ra234567h