This forum is in read-only mode. Please continue to browse, but replies are disabled for now. Why?

E200 4 wire Throtle cable

I bought my son a new thumb throttle switch for his E200 razor scooter. The problem is the wires are not the same colors as the old switch. The old Switch wire colors were Orange, White, Yellow and Red. The new Switch colors are Yellow, Black, Green and Red. The wires from the control module are Grey, Green, Black and Red. I don't know which colors should match up. Any help would be greatly appreciated. Thanks

The wire colors should be matched together as follows:
  • Red to Red
  • Black to Black
  • Green to Green
  • Yellow to Gray

Login or Signup to post a comment