 |
|
 |
ElectricScooterParts.com Support Center
How can we help you today?
This forum is in read-only mode. Please continue to browse,
but replies are disabled for now. Why?
Electric Scooter Key Switch Panel Cutout Dimensions
It looks great, but where on the scooter would you make such a cut out
ESP Support
said
almost 8 years ago
Some electric scooters have the key switch mounted in a plastic box under the handlebars or in a console at the handlebar level. Here is a photo of an E-Scooter dolphin body electric scooter that has the key switch mounted in the plastic box that is directly under the handlebars.
I have seen other electric scooters that have key switches mounted on the side of the battery box, however that always seemed like a bad idea because if the scooter fell over or side swiped something then the key could be bent or broken off.
Some scooters and bikes have frames with large tubes that have a big enough interior diameter to hold a key switch. I have seen some A2B electric bicycles which have a frame mounted key switch.
I have seen other electric scooters that have key switches mounted on the side of the battery box, however that always seemed like a bad idea because if the scooter fell over or side swiped something then the key could be bent or broken off.
Some scooters and bikes have frames with large tubes that have a big enough interior diameter to hold a key switch. I have seen some A2B electric bicycles which have a frame mounted key switch.
ESP Support
I just created an illustration showing the shape and dimensions of the panel cutout required to mount the most common electric scooter key switches and I wanted to share it with the forum.