This forum is in read-only mode. Please continue to browse, but replies are disabled for now. Why?

motor #MOT-24250G

 Is there a sprocket available to fit the 11mm output shaft (motor-24250G) for a #25 chain?

Want to use the motor to drive wheels on a wooden  train that has 3 drive shafts and requires low speed and torque. Need the 400rpm of the motor to control rpm.

thank you,


There are no sprockets available for #25 chain that fit the 11mm output shaft of the MOT-24250G motor. The only sprockets that are available for it are for #410 (1/2" x 1/8") bicycle chain, and for 8mm chain. The sprocket for 8mm chain has 25 teeth though.

We have a fair selection of sprocket sizes for #410 chain though which are available on this page:

Please let us know if you have any questions.

Login or Signup to post a comment