 |
|
 |
ElectricScooterParts.com Support Center
How can we help you today?
This forum is in read-only mode. Please continue to browse,
but replies are disabled for now. Why?
Ezip 500 extra battery wiring parts help
What else is needed.
(17.5 KB)
ESP Support
said
about 6 years ago
The SWT-154 switch has 1/4" tab terminals on it which are the same size as the battery's tab terminals.
If we were building this we would use the following parts:
- FUS-360 fuse holder
- FUS-ATO40 fuse
- CNX-06F and CNX-08F terminals
- WIR-120 and WIR-121 12 gauge wire
- CNX-W6.3MH-4T connector housing and CNX-6.3F-L connector terminals
The battery packs are 24 Volts so a miniature solar panel with charge controller designed for a 24 Volt sealed lead-acid battery pack would be needed to recharge the battery packs.
David Kuchar